AND STOPS SQUEAK
FOR AT LEAST 1 YEAR
FREEZING AT TEMPERATURES
DOWN TO -80°С
LIFE OF GUNS
TYPES OF EQUIPMENT
THAT CAN BE USED BY PRODUCT
I own a gun store and shooting range in Florida and just started using Nanoprotech Gun Anticor. I was introduced to it at Nanoprotech’s sales booth in the Tulsa arms shows in Oklahoma. I started spraying all the rental guns with it because it’s faster and easier then breaking down, cleaning, and oiling 34 pistols and 7 rifles by myself every day.
I own a small derringer that I have for self-defense. The Nanoprotech Gun spray keeps the gun clean and functioning even when I fire it at the range during winter.
Melisa T. Hodgenville, KY
- Next-generation penetrating lubricant
- Facilitates the removal of soot
- Prevents wear and tear
- Lubricates at a temperature from -112 F to 320F
- Penetrates into hard-to-reach spots
- Stable invisible coating
Product Life Span: 1 year or more after application if product is used under normal circumstances.
Composition: highly refined mineral oil, anticorrosion additives, antioxidants, dearomatized paraffin, and naphthene hydrocarbons, NANOPROTECH formula, propane, butane.
Developed on the basis of advanced nanotechnologies.
NANOPROTECT ANTICOR PERFORMANCE TEST:
The Steel Coupons were subjected to salt fog exposure in accordance with the RTCA/DO-160G, Section 126.96.36.199, Category T, Severe Salt Fog test. The test hardware was exposed to forty-eight (48) hours of salt fog followed by a twenty-four (24) hour dry out, and then repeated once more. A visual examination of the test hardware after application of the salt fog environment revealed varying degrees of corrosion on some of the coupons. The test hardware was returned to the customer for evaluation following test completion.
- t = – 31 F,
- Test objects were continiously sprayed with 5% sodium chloride solution, saline solution.
Metal coupons treated with different kinds of anti corrosion productszigma spray 500
APPLICATION AREAS & INSTRUCTION
Application areas: op rod, barrel hood, cam pin, open ejection port, slide rail groove, center rail, action spring,and the like movable parts.
Recommended directions for use: make sure to shake the can before use. Spray at the distance of 8-12 inches from the surface. After application on the surface, let the nanocoating rest for 10 minutes. If necessary, remove any excess spray. Wait for 24 hours to get the best protection.
Consumption: one can for 22 square feet. It is recommended to apply at a temperature range from – 4°F to +95°F.
Warning: Keep out of reach of children. Read label cautions carefully. Follow label directions to avoid injury. Use with adequate ventilation. Do not use in confined areas. Intentional misuse by deliberately concentrating and inhaling the contents of this product may be harmful or fatal. Keep away from heat, sparks, or open flames. Wash hands thoroughly after each use. Do not smoke while using. Avoid contact with skin and eyes. Avoid breathing vapor or mist. Get medical advice/attention if you feel unwell. Do not puncture container. Do not expose to temperatures above 120°F as container may vent, rupture, or burst. Do not puncture or incinerate container. Do not store in direct sunlight. Store in cool, dry, well-ventilated area away from incompatible materials. Dispose of contents and container in accordance with local, state and federal regulations.